Mid-Cure™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for Quik-Cure™ in most applications. Mid-Cure™ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.
Works Best On:
- Hard Wood
Works Good On:
- Balsa Wood
- Soft Wood
- Glass & Metal
- Hard Plastics
- White Foam
Mid-Cure™ 15 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
Mid-Cure™ should be applied in temperatures above 65°. It can be used in most applications when you need more working time than Quik-Cure™ provides. Mid-Cure™ can be worked for about 10 minutes, with adhesion beginning after about 15 minutes.
Mid-Cure™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. Mid-Cure™ is our most flexible epoxy. This gives it superior bonding qualities in applications such as hardwood to fiberglass. Mid-Cure™ lack of brittleness allows it to form lasting bonds in areas subject to high vibration or stress. Mid-Cure™ is a water-resistant substitute for Quik-Cure™. Full cure in 2-3 hours.